Water
Waste waterThese under-pressure collars are designed for large-diameter branches and bypass diversions. They can be installed on polyethene and polyvinyl chloride (PVC) oriented strand pipes for up to a nominal maximum of 16 Bar water pressure.
There is a flange on the top part of these Giga collars meeting the DIN standard and to which any type of standard accessory can be attached. The lower part includes a two piece collar scritable for mounting on any PE or PVC-O pipe. The specific collar size must be chosen depending on each branching size and pipe diameter.
All the components in contact with water have the appropriate accreditation certificates for potable water.
The different materials that make up the Giga tees are electrically insulated to prevent galvanic type corrosion.
To carry out the under pressure connection operation, the water flow is interrupted, by means of inserting the stainless steel slide plate that is supplied with the Giga equipment.
The compactness of the Torre drilling equipment make it possible for these saddles to be installed in places with restricted access and in any vertical, horizontal or sloping position.
By loosening the nuts and inserting the slide plate, repair work can be carried out on the service connection network or the tapping can be capped off by means of inserting a blind end flange.
Collars are supplied in appropriately labelled boxes to facilitate their handling, storage and identification. Each box contains a flyer with assembly instructions, information regarding their application and the size cutter which should be used.
To carry out the under-pressure connection operation, the water flow is interrupted by inserting the stainless steel slide plate.
WRAS approved Silicone Lubricant – the only tested and approved lubricant for the safe use of Sarco Stopper products. For…
