Sarco Stopper | PVC GIGA Tees installed for use on strand pipes

PVC GIGA Tees Under Pressure Applications

These under pressure collars are designed for large diameter branches and by-pass diversions. They can be installed on polyethylene and polyvinyl chloride (PVC) oriented strand pipes for up to a nominal maximum pressure of 16 Bar water pressure.

Key Features

Outlets in 65mm, 80mm and 100mm
Low stack Height
Reusable Slide Plate Valve
One Bolt removed from Tee to create access for blade
Place Valve where it is needed and avoid other utilities
WRAS approved components
Also available to suit PE and Ferrous mains

Connection Types

There is a flange on the top part of these Giga collars meeting the DIN standard and to which any type of standard accessory can be attached. The lower part includes a two piece collar scritable for mounting on any PE or PVC-O pipe. The specific collar size must be chosen depending on each branching size and pipe diameter.

WRAS Certification for Potable Water

All the components in contact with water have the appropriate accreditation certificates for potable water.

Maximum Corrosion Resistance

The different materials that make up the Giga tees are electrically insulated to prevent galvanic type corrosion.

Slide Plate Shut Off

To carry out the under pressure connection operation, the water flow is interrupted, by means of inserting the stainless steel slide plate that is supplied with the Giga equipment.

Convenient Installation

The compactness of the Torre drilling equipment make it possible for these saddles to be installed in places with restricted access and in any vertical, horizontal or sloping position.

Capping Off Service Connections

By loosening the nuts and inserting the slide plate, repair work can be carried out on the service connection network or the tapping can be capped off by means of inserting a blind end flange.

Easy Storage

Collars are supplied in appropriately labelled boxes to facilitate their handling, storage and identification. Each box contains a flyer with assembly instructions, information regarding their application and the size cutter which should be used.